Standard Electrical Testing in PCB Manufacturing
 

Electrical testing is a critical and indispensable step in bare board manufacturing. At Well Smart Electronics, all bare PCBs - whether single-layer, multi-layer, rigid, flexible, or HDI - undergo 100% electrical testing prior to shipment.

This ensures circuit connectivity matches the original netlist and that all layers are free from shorts or opens. We strictly adhere to the IPC-9252A standard and provide comprehensive test coverage for every net defined in your design.

AT A GLANCE
100% of bare boards tested
IPC-9252A compliant
Every net covered
Shorts and opens verified
Rigid, flex, and HDI
01 / FILE REQUIREMENTS
Electrical Test File Requirements
To ensure testing accuracy and completeness, we recommend that clients submit a netlist file (IPC-356 format) along with their Gerber data. A netlist sourced directly from the design origin ensures high fidelity and accurate fault detection.
If a netlist is not provided, we will generate one from the Gerber files for connectivity testing.
Providing a design netlist offers the following advantages:
01
Higher test coverage accuracy
Increases the accuracy of test coverage.
03
High-reliability compliance
Ensures compliance with high-reliability standards.
02
No CAM-induced discrepancies
Avoids discrepancies caused by CAM modifications.
02 / TEST METHODS
Electrical Test Methods: Flying Probe Test vs. Test Fixture
Well Smart Electronics offers two primary electrical test methods for your bare PCBs. Each method has its unique advantages and is suited to different stages of the production process, depending on factors such as board size, design complexity, volume, and cost-effectiveness.
FLYING PROBE TEST
Ideal for Prototyping and Low-Volume Production
No fixture setup - Test points are directly probed by movable test heads, allowing access to all parts of the PCB without additional tooling.
High test precision - Pitches as fine as 4 mil (0.1mm), highly suitable for high-density PCBs and fine-pitch designs.
Rapid deployment - With no fixture setup time, testing can commence quickly once netlist and Gerber data are provided.
Cost-effective for low volumes - For small batches or custom boards, flying probe avoids the high upfront cost of fixture development.
TEST FIXTURE (BED-OF-NAILS)
Optimal for High-Volume Production
Custom fixture fabrication - Initial time is required to build a fixture tailored to your PCB design; once in place, testing is highly automated and fast.
Simultaneous testing - The fixture checks all test points on the PCB at once, reducing test time per board and increasing throughput.
Low per-unit cost at high volume - The per-board test cost decreases significantly as volume increases.
Faster operational speed - After fixture setup, test time per PCB is drastically reduced, optimizing efficiency and shortening lead times.
03 / HOW TO CHOOSE
How to Choose the Right Method for Your Project
Flying Probe Test
Suitable for prototypes, low-volume batches, and high-density designs where flexibility and fast turnaround are paramount.
Test Fixture Test
Suitable for high-volume production where minimizing per-unit cost and maximizing speed are critical.
By selecting the appropriate electrical test method, Well Smart Electronics ensures your circuit boards are thoroughly tested while optimizing both quality and cost-effectiveness.
Contact Us To Get Instant Quote
04 / QUALITY ASSURANCE
Transparent Testing, Quality Assurance, and Reliable Support
At Well Smart Electronics, we firmly believe that process transparency and rigorous documentation are the cornerstones of quality.
We are committed to providing clients with clear, traceable test reports, ensuring every PCB delivered meets the highest standards of quality requirements.
EVERY SHIPMENT
Clear, traceable test reports
Every net verified against the netlist
Shorts and opens fully documented
Test reports available with every delivery
05 / FAQ
Electrical Testing FAQ
1. Is electrical testing performed on every board?
Yes. All bare PCBs - single-layer, multi-layer, rigid, flexible, or HDI - undergo 100% electrical testing prior to shipment. This verifies that circuit connectivity matches your original netlist and that all layers are free from shorts or opens, in line with the IPC-9252A standard.
2. What files should I submit?
We recommend a netlist file (IPC-356 format) alongside your Gerber data. A netlist taken directly from the design origin gives high fidelity and accurate fault detection. If none is provided, we generate one from the Gerber files for connectivity testing.
3. Why provide a design netlist rather than let you derive it?
It increases the accuracy of test coverage, avoids discrepancies introduced by CAM modifications, and supports compliance with high-reliability standards.
4. Flying probe or test fixture - which is right for my project?
Flying probe suits prototypes, low-volume batches, and high-density designs where flexibility and fast turnaround matter most. Test fixture is better for high-volume production where minimizing per-unit cost and speed are critical.
5. What are the advantages of flying probe testing?
No custom fixture is required, so testing starts as soon as netlist and Gerber data are ready - lower upfront cost and rapid deployment. It also resolves pitches as fine as 4 mil (0.1 mm), making it suitable for high-density, fine-pitch boards.
6. What are the advantages of fixture testing at volume?
A customized fixture tests all board points simultaneously, sharply reducing time per board and increasing throughput. While fixture fabrication costs more up front, the per-board test cost drops significantly as volume rises.
Need 100% electrical testing on your next bare board order? Contact Well Smart Electronics for an instant quote.
Value Commitment: Testing Every Net, Documenting Every Result
Process transparency and rigorous documentation are the cornerstones of quality. Every bare PCB we ship has passed 100% electrical testing to the IPC-9252A standard.
PHONE
+86 181 2210 1258
ADDRESS
604#, No.27, Huafa Bei Road, Shangcun, Gongming, Guangming, Shenzhen, Guangdong, China


Home
Services
News
Contact