Well Smart PCBA First Article Inspection Services
First Article Inspection (FAI) is the formal verification of the first assembled PCBA before a batch is released to volume production. It confirms that every process step - sourcing, placement, soldering, and inspection - has produced a board that matches the approved design data.
At Well Smart Electronics, FAI is the gate between engineering validation and series manufacturing. We verify the first article against Gerber, BOM, and assembly drawings, document every finding in a traceable report, and give you a clear go / no-go decision before you commit to the batch.
WHAT THE FAI REPORT COVERS
Revision and documentation match
Component and MPN verification
Placement and polarity check
Solder joint quality
Marking and traceability
Go / no-go conclusion
First Article Inspection Checklist
The first article is inspected item by item against the released documentation. Typical verification points include:
01
Revision and Data Package Match
Confirms the BOM, Gerber, pick-and-place, and assembly drawing revisions are identical to the approved sample data.
03
Component and MPN Verification
Checks that critical components use the exact approved manufacturer part numbers or documented substitutes.
05
Solder Joint Quality
Inspects joints to IPC-A-610 criteria, with AOI for visible areas and X-Ray for hidden joints such as BGA and QFN.
07
Marking and Traceability
Verifies board marking, date codes, and serial number traceability required for series production.
02
Placement and Polarity Check
Validates component orientation, polarity, and placement accuracy, focusing on high-risk packages.
04
Mechanical Fit and Assembly
Confirms connectors, headers, and mechanical parts align with the enclosure and mating interfaces.
06
Electrical Verification
Runs FAI together with ICT or functional test where electrical behavior must be demonstrated, not just inspected.
08
Process Parameter Review
Reviews reflow profile, solder paste volume, and other process records against the defined window.
All findings are documented with clear pass / fail status against customer-defined acceptance criteria, and every result is traceable to the inspected board.
Process to Initiate First Article Inspection
If your product is entering NPI, moving to a new EMS partner, or starting a new revision, FAI is the safest way to de-risk the first production batch. Well Smart Electronics supports the full cycle from data review to the release decision.
YOU PROVIDE
Inputs from your engineering team
Gerber, BOM, and assembly drawing for the target revision.
Approved sample or reference board, where available.
Acceptance criteria and any special inspection requirements.
Interface definitions and mating parts for fit checks.
WE DELIVER
A documented go / no-go decision
A complete FAI report with item-by-item inspection results.
Component-level verification records, including MPN confirmation.
Inspection photos and, where used, AOI / X-Ray evidence.
Non-conformance findings with corrective action recommendations.
A clear conclusion: release to production, or fix before ramp-up.
If your documentation is incomplete, our engineering team can help organize the data package and define a practical inspection scope before the first build.
Whether the batch size is 10 or 10,000 units, the same first article discipline applies - and the earlier it is done, the cheaper every correction becomes.
When is First Article Inspection Needed?
FAI is strongly recommended whenever the production conditions change in a way that affects the assembled result:
New Product Introduction (NPI)
First transfer from prototype to series production.
Design or revision change
New PCB revision, BOM update, or substitution.
EMS or supplier transfer
The same design built by a new manufacturing site.
Process or tooling change
New stencil, reflow profile, or production line.
High-risk assemblies
BGA, QFN, fine-pitch, or hidden-joint packages.
Compliance-driven programs
Customer or industry requirements demand documented first article approval.
A batch released without first article approval carries hidden cost: every defect found after ramp-up multiplies across the lot. FAI moves that risk to the point where correction is still cheap.
Our engineering team can review your data package and advise on the depth of inspection that matches your product risk and production volume.
PCBA First Article Inspection FAQ
What is First Article Inspection (FAI) in PCBA manufacturing?
FAI is the formal inspection of the first assembled board of a batch against the released design data - Gerber, BOM, and assembly drawings. It verifies that materials, placement, soldering, and marking all match the approved revision before volume production starts.
What is checked during FAI?
Documentation and revision match, component part numbers and substitutes, placement accuracy and polarity, solder joint quality to IPC-A-610, mechanical fit, marking and traceability, and - where required - electrical verification together with ICT or functional test.
How is FAI different from AOI or ICT?
AOI and ICT are per-board checks inside the production flow. FAI is a one-time, documented validation of the whole process chain - it proves the setup is correct before the line commits to the batch. FAI often combines AOI, X-Ray, and test results into a single report.
What do I need to provide to start an FAI project?
The released data package (Gerber, BOM, pick-and-place, assembly drawing), acceptance criteria, and any reference sample. If documentation is incomplete, we help organize it and define the inspection scope first.
What does the FAI report include?
Item-by-item inspection results with pass / fail status, component verification records, inspection photos and AOI / X-Ray evidence where used, non-conformance findings with corrective actions, and a clear release or fix recommendation.
Do small batches also need FAI?
Yes. Batch size does not change the logic: whatever ships first sets the quality reference for everything that follows. For small batches, FAI is scaled down in scope, not skipped.
Can FAI be combined with other services?
Yes. FAI integrates naturally with AOI, X-Ray, ICT, and functional testing, and with our SMT workflow. Many customers run FAI as the first gate of the NPI program and reuse its results for quality planning.
How long does a first article inspection take?
Lead time depends on board complexity and inspection depth. Standard FAI is completed within the first article build cycle; urgent programs can be prioritized - contact us with your data package for a specific schedule.
Value Commitment: Building a Zero-Defect Defense Line
First Article Inspection is a core component of the Well Smart Electronics Quality Management System. Through our "dual-verification" mechanism - joint confirmation by quality personnel and professional electronics engineers - we ensure the initial production inspection becomes your quality benchmark.
E-Mail:
Phone:
+86 181 2210 1258
Address:
604#, No.27, Huafa Bei Road, Shangcun, Gongming, Guangming, Shenzhen, Guangdong, China